Yamaha Wolverine RMAX 2/4 (2022)Yamaha Wolverine X2 (2019-2022)Yamaha Wolverine X4 (2018-2022)*Important Note – The connectors that our turn signal system also connects online to the 2018 Wolverine are located in a male/female direction from the front of the UTV to the rear. The connectors of the 2019-2021 model are located in a female/male direction from the front of the UTV to the rear, but this is not always the case as some still use the 2018 orientation. To ensure fit, please check the orientation of the driver`s rear grip on your Wolverine before ordering. Given the Yamaha Wolverine`s ability to operate, it would be a real shame to limit it to off-road tracks and mud courses. By adapting your Yamaha Wolverine or Wolverine RMAX to your local homologation regulations, you can get even more out of your Yamaha Wolverine. With spare parts and accessories for UTV road approvals from the aftermarket, you can use your Yamaha Wolverine to walk around town, run errands, drive on the road to visit your friend or just drive on scenic country roads. Road legal requirements for UTVs and side-by-side can vary greatly by city, county, state, and country, but no matter where you live, there are some legal road parts and accessories you can rely on. That`s exactly what you`ll find here at Everything Yamaha Offroad. Plug and Play Easy InstallFits 2019-2021 Yamaha Wolverine Only – Uses Factory TaillightsComes come with 3/4″ front turn signals – 3 leds 2 and 4 seaterModelsNetworksLed engraved LED lit switch Turn SwitchLit Horn Emergency Hazard SwitchAutomotive HornMade In The USA!* Before ordering, please note the note below Also included in our Yamaha Wolverine 2019+ turn signal kit is a “Hazard/Horn” toggle switch.

By pressing the upper side “Hazard” of the actuator, the hazard lights are turned on, which will bring the switch back to the middle position, they will be deactivated. In addition, pressing the bottom part of the custom toggle switch activates the supplied FIAMM horn. A front strap is included, which includes two Maxxima 3/4″ amber LED lights that can be mounted in any corner by piercing a set. Additional lights and separators are sold separately for those who wish to extend their configuration. Travel the city and country roads with Yamaha Wolverine road tires and other Yamaha Wolverine road accessories from Everything Yamaha Offroad. And in addition to the complete Yamaha Wolverine X2/X4/RMAX road approval kits, we also offer Everything Yamaha Offroad riders custom Yamaha Wolverine road approval parts such as turn signals, mirrors, horns and more! This kit is just part of what you need to be “Street Legal” to check your local regulations for specific requirements in your area. Off-road vehicle conversion is not legal in all states. Check local laws before purchasing this product. We have all the legal things for the road for the Yamaha Wolverine such as side mirrors, mirrors, turn signals, horns, illuminated license plate holders, fire extinguisher holders and registration letters and numbers. Our selection of road-approved parts and accessories for Yamaha Wolverine is provided by trusted and renowned brands such as Strong Made, Moose, XTC Power Products, AJK Offroad, EMP, SuperATV, Bad Dawg, Dragonfire Racing, Axia Alloys and Hardline Products. XTC Power Products` universal Yamaha Wolverine self-cancelling turn signal system with OEM horn and interface wires makes it easier than ever to install turn signals and a horn on your Yamaha Wolverine, and Moose`s Yamaha Wolverine 2″ side mirrors are a great way to maximize visibility on the road.

XTC Power Products is a leader in UTV cabling. Installing turn signals on a UTV is easier than ever with our turn signal system for the 2019+ Yamaha Wolverine. The TSS (Turn Signal System) consists of a relay control box and horn mounted under the hood and turn signal, as well as custom hazard/horn switches mounted in the dashboard. A vehicle-specific rear belt included integrates with the Yamaha Wolverine OEM taillights and turns them into turn signals. Kit Details: The kit uses the standard taillight sets as signals for a clean factory appearance. Combined indicator and horn switch mounted on the steering column. LED FRONT turn signals – bright orange when turned on. Electronic Flasher – 114 dB HornHorn button located at the end of the turn signal switch shaftSilly light mounted on the control panel – White LED license plate light – License plate mounting materialComplete cable holes cut to the exact length with factory connectors. All necessary hardware, metal fasteners and connectorsDetailed installation guide ⚠ / illustrated From California Proposition 65 Warning ⚠: This product may contain a chemical that the State of California knows causes cancer or birth defects or other reproductive damage. The X2, X4 and RMAX kits currently take about a week. Click here to see Wolverine`s installation instructions (not X4 or X2) Unlike our competitors, all TSS kits include an auxiliary power output for a license plate lamp or whip lights.