No products in the cart.
Showing 1–16 of 17 results
Rode Link News Shooter Kit
- Series II, 2.4GHz digital transmission
- 128-bit encryption
- Up to 100 metres range*
- OLED display (on receiver)
- One touch pairing
- Five level gain control
- AA battery, NP-F battery or USB powered
- Locking XLR input and headphone output on transmitter
Add to Wishlist
Add to Wishlist
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 40Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 134dBSPL |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 20dBA |
Power Options | |
Weight | 288.00g |
Dimensions | 65.00mmH x 102.00mmW x 170.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration here |
Add to Wishlist
Add to Wishlist
- Broadcast sound quality
- Low noise circuitry
- Internal rechargeable lithium battery, supplying over 150 hours operation
- Fully charged in under two hours via MicroUSB
- Rugged metal construction
- Convenient digital switching
- High Frequency Boost
- High Pass Filter (Flat/75Hz)
- PAD (-10db)
- MicroUSB cable included
- 10 year extended warranty when you register your microphone
Add to Wishlist
Add to Wishlist
Acoustic Principle | Line Gradient |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 20Hz - 20kHz (selected HPF @75Hz) |
Output Impedance | 200Ω |
Maximum SPL | 135dBSPL |
Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 16dBA |
Power Options | |
Weight | 126g |
Dimensions | 225mmH x 22mmW x 22mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration here |
Add to Wishlist
Add to Wishlist
Acoustic Principle | Line Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.50" |
Address Type | End |
Frequency Range | 40Hz - 20kHz (selected HPF @80) |
Output Impedance | 200Ω |
Maximum SPL | 134dBSPL |
Maximum Output Level | 6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity | -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 14dBA |
Weight | 85g |
Dimensions | 100mmH x 75mmW x 170mmD |
Warranty | 1 year with free extension to 10 years following registration here |
Add to Wishlist
Add to Wishlist
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 40Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 143dBSPL |
Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 12dBA |
Power Options | |
Weight | 300g |
Dimensions | 102mmH x 118mmW x 100mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration here |
Add to Wishlist
Add to Wishlist
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.50" |
Address Type | End |
Frequency Range | 40Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 134dBSPL |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 18dBA |
Weight | 116g |
Dimensions | 134mmH x 80mmW x 115mmD |
Warranty | 1 year with free extension to 10 years following registration here |
Add to Wishlist
Add to Wishlist
-
Acoustic Principle Line Gradient Active Electronics JFET impedance converter Capsule 0.55" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz (selected HPF @75Hz/150Hz) Output Impedance 200Ω Maximum SPL 133dBSPL Maximum Output Level 7.7dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 14dBA Power Options Weight 122g Dimensions 111mmH x 66mmW x 170mmD Output Warranty 1 year with free extension to 10 years following registration here
Add to Wishlist
Add to Wishlist
The SoundField by RØDE NT-SF1 is a peerless ambisonic microphone that captures broadcast quality 360° surround sound (with height) in A-Format™ on four separate tracks. It is the first collaboration between the pioneering ambisonic brand SoundField (which invented the first commercial ambisonic microphone) and RØDE Microphones.
Precision manufactured from solid brass, the NT-SF1 uses four RØDE TF-45C ½” true-condenser cardioid microphone capsules arranged in a tetrahedral array to record the entire spherical sound field. Every sound, every direction, perfectly. Created in-house at RØDE’s Sydney HQ, the TF-45C is machined to tolerances of less than 1 micron in our state-of-the-art fabrication facilities. The result is a capsule with breathtaking clarity, sonic purity and exceptionally low noise.
Add to Wishlist
Add to Wishlist
- Revolutionary acoustic design, delivering a natural, uncoloured sound.
- Extremely lightweight (just 76g), and short in length (just 203mm)
- Tailored frequency response and very low self-noise of just 10dBA
- Highly directional supercardioid polar pattern and smooth off-axis response
- RF-bias technology and conformal coating ensure superior performance in adverse environmental conditions
- Comes in a complete location recording kit with WS10 windshield, PG2-R pistol grip and other accessories
NTG5 SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS
Acoustic Principle | RF-bias condenser |
Active Electronics | RF-bias demodulation |
Polar Pattern | Supercardioid shotgun |
Frequency Range | 20 Hz – 20 kHz |
Frequency Response | 80 Hz - 20 kHz ±3 dB |
Output Impedance | 25 Ω |
Signal to noise Ratio | 84 dB |
Equivalent Noise | 10 dB SPL (A-weighted, as per IEC651) |
Input SPL @ 1% THD | 130 dB SPL (1kHz @ 1% THD, 600 Ω load) |
Power Requirements | 2 mA @ 48V phantom power |
Sensitivity | -23.5 dB re. 1 Volt/Pascal or Better (66 mV @ 94 dB SPL @ 1 kHz) |
MECHANICAL SPECIFICATIONS
Dimensions (L x W x H, mm) | NTG5: 203 x 19 PG2-R:117 x 60 x 240 |
Weight (g) | NTG5: 76g PG2-R: 224g |
Add to Wishlist
Add to Wishlist
Rode VideoMic NTG
- Revolutionary acoustic design, delivering unmatched acoustic transparency and a natural, uncoloured sound.
- Highly directional supercardioid polar pattern and very flat frequency response
- Unique infinitely variable gain control
- Auto-sensing 3.5mm output interacts seamlessly with both cameras and mobile devices
- Class-compliant USB-C output with headphone output for seamless audio monitoring
- Digital switching – controls high-pass filter, pad, high frequency boost, and safety channel
- dB peak warning light
- Internal rechargeable lithium-ion battery provides 30+ hours of recording, charges via USB-C
- High-quality Rycote® Lyre® shock mounting with cable management and a sliding rail to adjust mic placement on a camera cold shoe.
- Lightweight (94g) and rugged aerospace-grade aluminium construction
Add to Wishlist
Add to Wishlist
Rode wireless GO
Wireless GO
COMPACT WIRELESS MICROPHONE SYSTEM
The Wireless GO is an ultra-compact wireless microphone system that is unique in its clip’n’go versatility and incredibly compact form-factor. The transmitter features an in-built omnidirectional condenser capsule and can be used as a clip-on mic or with a RØDE lavalier, sending crystal-clear, broadcast-grade audio via 2.4GHz digital transmission to the on-camera receiver. It’s the perfect wireless mic solution for content creators in all disciplines: filmmakers, on-camera presenters, newsgatherers, vloggers and more.
Add to Wishlist
Add to Wishlist
Rode Wireless GO II
- Dual channel wireless microphone system for recording two sound sources simultaneously
- Series IV 2.4GHz digital transmission, 128-bit encryption – crystal-clear audio at up to 200m (line of sight), optimised for extremely stable operation in dense RF environments
- 3.5mm TRS analog output, USB-C and iOS digital output – universal compatibility with cameras, mobile devices and computers
- On-board recording – over 40 hours of internal memory
- Option to record each channel separately or combine them for ultimate flexibility in post-production
- Safety channel, flexible gain control (three-stage pad, expandable to 10-stage)
- In-built rechargeable lithium-ion battery – up to 7 hours battery life
- Designed and made in RØDE’s precision manufacturing facilities in Australia
Add to Wishlist
Add to Wishlist
Rode NT2-A Condenser Microphone
- Large 1” HF1 gold sputtered capsule
- On body control of polar pattern, HPF and PAD
- Three position variable polar pattern - Omni, Cardioid or Figure 8
- Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
- Three position PAD - 0dB, -5dB or -10dB
- Ultra low noise
- Internal capsule shock mounting
- Includes RØDE SM6 shock mount, pop filter and dust cover
- Designed and manufactured in Australia
- 10 year extended warranty when you register your microphone
Add to Wishlist
Add to Wishlist
RODE NT 1-A Condenser Microphone
- Large diaphragm 1” gold-sputtered capsule
- Cardioid polar pattern
- Ultra low noise, self noise of only 5dB (A)
- Wide dynamic range
- True condenser (externally biased)
- Internal capsule shock mounting
- Includes RØDE SM6 shock mount, pop filter and dust cover
- 10 year extended warranty when you register your microphone
Add to Wishlist
Add to Wishlist
Neumann TLM 102 Condenser Microphone
- Plug and play handling - Easy handling for vocal and instrumental recordings
- Distortion-free sound even highest sound pressure levels
- Slight treble boost for brilliant sound and silky vocals (independent of music genre)
- Built-in pop shield
Add to Wishlist
Add to Wishlist
Filter Products
Contact
info@domain.com
+1 800 123 456